SCH-r610 Series
P O R T A B L E
M O B I L E
User Manual
T R I - M O D E
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5,
107, 225; 5, 109, 390.
Printed in Korea.
Openwave® is a registered Trademark of Openwave, Inc.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat.
5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and other patents pending.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
r610.06_AJ10_CB_102607_F3
Table of Contents
Section 1: Getting Started ..........................................................................4
Understanding this User Manual ...............................................................................4
Activating Your Phone ...............................................................................................5
Charging the Battery .................................................................................................7
Setting Up Your Voicemail .........................................................................................8
Features of Your Phone .............................................................................................9
Closed View of Your Phone .....................................................................................10
Open View (Front) of Your Phone .............................................................................11
Open View (Back) of Your Phone .............................................................................13
Command Keys ......................................................................................................14
Right Soft Key .........................................................................................................14
Understanding the Display Screen ..........................................................................16
Your Phone’s Modes ...............................................................................................17
Section 3: Call Functions .........................................................................21
Making a Call — Number Entry Dialing ...................................................................21
Making a Call — Speed Dialing ..............................................................................23
Making a Call — Quick Search Dialing ...................................................................24
Making a Call — Voice Dialing ................................................................................25
Answering a Call .....................................................................................................27
Ignoring a Call ........................................................................................................28
Adjusting the Call Volume .......................................................................................28
Calls Log ................................................................................................................28
Roaming .................................................................................................................34
Menu Navigation .....................................................................................................36
Menu Shortcuts ......................................................................................................37
Navigation Key Shortcuts ........................................................................................37
Navigate Using a Shortcut .......................................................................................37
Menu Shortcuts Outline ..........................................................................................37
Section 5: Entering Text ...........................................................................44
Changing the Text Entry Mode ................................................................................44
Using T9® Mode ....................................................................................................45
Using Abc Mode ......................................................................................................46
Entering Symbols ....................................................................................................46
Entering Numbers ...................................................................................................47
Your Contacts List ...................................................................................................48
Adding a New Contacts Entry ..................................................................................49
Finding a Contacts Entry .........................................................................................52
Editing an Existing Contact Entry .............................................................................55
1
Assigning Speed Dial Numbers ...............................................................................57
Memory Info ...........................................................................................................63
Section 7: Messaging .............................................................................. 64
Types of Messages .................................................................................................64
Send Picture Messages in Camera Mode ................................................................66
Receive Messages ..................................................................................................70
Message Settings ...................................................................................................77
Section 8: easyedgeSM .............................................................................. 80
easyedgeSM Features ............................................................................................80
Accessing easyedgeSM ..........................................................................................80
Section 9: Display .................................................................................... 84
Menu Style .............................................................................................................85
Clock Format ..........................................................................................................85
Dialing Font ............................................................................................................86
Section 10: Sounds .................................................................................. 88
Ringer Type ............................................................................................................89
Key Tone ................................................................................................................90
Saving Pictures and Videos .....................................................................................97
Section 12: Multimedia .......................................................................... 114
Table of Contents
2
My Ringtones ........................................................................................................116
My Sounds ...........................................................................................................117
Music Library ........................................................................................................120
Section 13: Tools ....................................................................................125
Tools Menu ...........................................................................................................125
Voice Service ........................................................................................................126
Bluetooth ..............................................................................................................131
Calendar ...............................................................................................................133
Memo Pad ............................................................................................................134
Alarm Clock ..........................................................................................................135
World Time ...........................................................................................................136
Calculator .............................................................................................................137
Stop Watch ...........................................................................................................138
Converter ..............................................................................................................138
Tip Calculator .......................................................................................................140
Accessing Your Settings .......................................................................................142
Location ...............................................................................................................143
Call Settings .........................................................................................................143
Phone Settings .....................................................................................................146
Memory Info .........................................................................................................153
Phone Info ............................................................................................................154
Health and Safety Information ...............................................................................155
Samsung Mobile Products and Recycling ..............................................................157
UL Certified Travel Adapter ...................................................................................157
Consumer Information on Wireless Phones ...........................................................157
Road Safety ..........................................................................................................164
Responsible Listening ...........................................................................................165
Operating Environment .........................................................................................167
Using Your Phone Near Other Electronic Devices ...................................................167
Potentially Explosive Environments .......................................................................169
Emergency Calls ...................................................................................................170
FCC Notice and Cautions .......................................................................................171
Other Important Safety Information .......................................................................171
Product Performance ............................................................................................172
Availability of Various Features/Ring Tones ...........................................................173
Battery Standby and Talk Time .............................................................................173
Battery Precautions ..............................................................................................173
Care and Maintenance ..........................................................................................175
Standard Limited Warranty ...................................................................................176
3
Understanding this User Manual
Section 1: Getting Started
Topics Covered
•
•
•
•
This section explains how to start using your phone by activating your service,
setting up your voicemail, or getting an understanding of how this manual is put
together.
Understanding this User Manual
The chapters of this guide generally follow the same order as the menus and sub-
menus in your phone. A robust index for quick reference to most features begins on
Also included is important safety information that you should know before using your
phone. Most of this information is near the back of the guide, beginning on page
Notes and tips
Throughout this guide are icons and text that are set apart from the rest. These are
intended to point out important information, quick methods for activating features, to
define terms, and more. The definitions for these methods are as follows:
• Notes — Explain alternative options within the current feature, menu, or sub
menu.
• Tips — Provide quick or innovative methods for performing functions related to
the subject at hand.
• Important — Points out important information about the current feature that
could affect performance, or even damage your phone.
Getting Started
4
Activating Your Phone
Contact U.S. Cellular and follow their instructions for obtaining service, if necessary.
We suggest that you read this guide to fully understand the services your phone
supports.
Install the Battery
Note: Your phone comes packaged with a partially charged rechargeable standard Li-Ion battery and travel
adapter.
Important!: You must fully charge the battery the first time you use your phone, otherwise you could
damage the battery.
1. Insert the bottom end of the battery first, matching the gold contacts on
the bottom of the battery to those inside the phone.
2. Press lightly on the top end of the battery down into the phone until it slips
into place.
3. Place the battery cover over the battery so that the bottom pins enter the
holes at the bottom of the battery compartment, then press down on the
battery cover until it clicks into place.
3
5
Activating Your Phone
Turn Your Phone On
1. Open your phone by pushing the slide up.
2. Press and hold the
key.
3. The phone begins searching for a network
signal.
4. Once the phone finds a signal, the time, date
and day appear in the bottom of the display.
Press
5. You’re now ready to open the slide on your
phone and to place and receive calls.
Tip: Your phone has an internal antenna. Do not touch the phone
case over the antenna while using your phone as this can affect
call quality and can cause the phone to operate at a higher
power level than is necessary.
Antenna
Note: If you are outside of your carrier’s coverage or roaming area, the No Service icon (
) appears at
the top of the phone’s display. If you cannot place or receive calls, try later when service is available,
or at another location.
Turn Your Phone Off
1. Push the slide up to open your phone.
2. Press and hold the
key for two or more seconds. Your phone powers
off.
Note: If your phone is on and you press
for less than one second, the phone will not power off. This
prevents your phone from being turned off accidentally.
Remove the Battery
Important!: You must unplug the Travel Adapter (if it is connected) before removing the battery from the
phone during charging to avoid damage.
1. If your phone is on, do the following:
•
•
•
Push the slide up to open your phone.
Press and hold the
Close the phone.
key to turn off the phone.
Getting Started
6
2. Press the battery cover at point (1) and lift the battery cover (2) away from
the phone.
3. Lift the battery (3) up and away from the phone, top end first.
3
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery. Only use
Samsung-approved charging devices and batteries. Samsung accessories are
designed to maximize battery life. Using other accessories may invalidate your
warranty and may cause damage.
Use the Travel Adapter
The travel adapter included with your phone is a
convenient, light-weight charger that rapidly charges
your phone from any 120/220 VAC outlet.
1. Plug the large end of the Travel Adapter
into a standard 120 VAC or 220 VAC wall
outlet.
Note: For connection to an electrical supply not located in North America, you must use an adaptor of the
proper configuration for the power outlet. Use of the wrong adapter could damage your phone and
void your warranty.
7
Setting Up Your Voicemail
2. Insert the smaller end of the
Travel Adapter into the charger/
accessory connector at the
bottom end of your phone.
Note: With the phone turned OFF, a discharged battery
recharges fully in approximately 3 hours.
+
Low battery indicator
Incorrect
The battery indicator (
right corner of the display indicates power
level. Monitor the battery strength and ensure your battery is adequately charged.
• Three bars ( ) indicate a full charge.
• An empty battery icon ( ) indicates a near empty battery.
• A blinking empty battery icon ( ) and a tone sounding indicate you have two to
) in the upper-
Correct
three minutes before the battery is too low to operate the phone.
If you continue to use your phone without charging its battery, the phone shuts
down.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be retrieved any time.
Note: Once your voicemail account has been set up, you can use the Voicemail folder (under the Message
menu) to view details of voice messages in your voicemail box.
1. In standby mode, press and hold the
key or dial your own mobile
number to dial voicemail.
2. Follow the prompts in the new user tutorial to setup your mail box.
Listen to voicemail
1. In standby mode, press and hold the
key or dial your own mobile
number to dial voicemail. After connecting, you will hear your voice
greeting.
2. Interrupt your greeting by pressing
.
3. You are then prompted to enter your password.
Getting Started
8
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
•
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
• Domestic and international voice and text messaging service (available on
participating networks).
• High speed data [Third Generation (3G) CDMA2000 1x EV-DO Technology]
• Global Positioning (GPS) Technology
• Personal Information Management (PIM) Functions
• Picture Messaging
• Video Messaging
• Text Messaging
• Stereo Music Player (MP3 compatible)
• microSD™ Memory Card Slot
• VGA (1.3 Mega Pixel) Camera with Flash
• Advanced Speech Recognition
• Speakerphone
®
• Bluetooth Wireless Technology**
** The SCH-r610 supports the wireless handsfree profile, serial port profile, and dial-up networking profile
for Bluetooth® wireless technology. The SCH-r610 does not support all Bluetooth OBEX profiles.
9
Closed View of Your Phone
Closed View of Your Phone
1. Earpiece/Speaker
2. Front Display
3.Volume Key
6. Camera Key
5. Power/Accessory
Connector
4. Memory Card
Slot
Features
1. Earpiece/Speaker — Lets you hear the other caller.
2. Front Display — Indicates the status of your phone, including numbers
dialed, feature and function screens, status icons, message indicators,
signal strength, and so on.
3. Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
4. Memory Card Slot — Lets you insert a microSD™ Memory Card for
additional storage of multimedia files.
5. Power/Accessory Connector — Used to plug in charging accessories
and to connect a headset or any available accessory cables to your phone.
6. Camera Key — Launches the Camera feature and/or the Camcorder
feature of your phone.
Understanding Your Phone 10
Open View (Front) of Your Phone
1. Earpiece
2. Display
3. Volume Key
4. Navigation Key
17. Right Soft Key
16. OK Key
5. Left Soft Key
6. SEND Key
7. CLR Key
15. END Key
14. Camera Key
13. Alpha-numeric Keys
8. Memory Card Slot
12. Power/Accessory Connector
11. Voice Recognition Key
9. Special Function Keys
10. Microphone
Features
1. Earpiece — Lets you hear the other caller.
2. Display — Indicates the status of your phone, including numbers dialed,
feature and function screens, status icons, message indicators, signal
strength, and so on.
3. Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
4. Navigation Key — In Menu mode, lets you scroll through the phone menu
options. In Standby mode, lets you access preset functions and one user-
defined function.
11
Open View (Front) of Your Phone
5. Left Soft Key — Used to navigate through menus and applications and to
select the choice indicated at the bottom left corner of the Main LCD.
6. SEND Key — Lets you place or receive a call. In standby mode, press the
key once to access the recent call log.
7. CLR Key — Deletes characters from the display when you are in text entry
mode. Press this key to return to the previous menu or screen when
navigating features on your phone.
8. Memory Card Slot — Lets you insert a microSD™ Memory Card for
additional storage of multimedia files.
9. Special Function Keys — Enter special characters. Performs various
functions.
10. Microphone — Lets the other caller hear you clearly when you are
speaking to them.
11. Voice Recognition Key — In standby mode, pressing and holding this key
launches VoiceSignal options.
12. Power/Accessory Connector — Used to plug in charging accessories
and to connect a headset or any available accessory cables to your phone.
13. Alpha-numeric Keys — Use these keys to enter numbers, letters, and
characters.
14. Camera Key — Launches the Camera feature of your phone.
15. END Key — Ends a call. If you press and hold the END key, the power goes
On or Off. When you receive an incoming call, press to send the call to
voicemail.
16. OK Key — Pressing when navigating through a menu accepts the
highlighted choice in a menu.
17. Right Soft Key — Used to navigate through menus and applications and
to select the choice indicated at the bottom right corner of the Main
Display.
Understanding Your Phone 12
Open View (Back) of Your Phone
9. Flash
1. Mirror
2. Camera Lens
8. Speakers
3. Battery Cover
7. Volume Key
4. Camera Key
6. Memory Card
Slot
5. Power Accessory
Connector
Features
1. Mirror — Lets you position the Camera Lens to take self portraits.
2. Camera Lens — The lens of your built-in camera.
3. Battery Cover — Lets you access your phone’s battery.
4. Camera Key — Launches the Camera feature and/or the Camcorder
feature of your phone.
5. Power/Accessory Connector — Used to plug in charging accessories
and to connect a headset or any available accessory cables to your phone.
13
Command Keys
6. Memory Card Slot — Lets you insert a microSD™ Memory Card for
additional storage of multimedia files.
7. Volume Key — Lets you adjust the ring volume in standby mode, adjust
the voice volume during a call, or mute the ringer during an incoming call.
8. Speakers — Enabled by Speakerphone key or Media Player for handsfree
operation or to play music.
9. Flash — Lets you take pictures or videos with your phone’s Camera-
Camcorder feature in low light.
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the Left soft key (
) and the Right soft key (
).
Left Soft Key
Some functions of the left soft key are as follows.
• In standby mode, press the Message (left) soft key (
menu.
) to open the Messages
• In a Memo or in the Calendar screen, press the Add (left) soft key (
text Memo or a new Event.
) to add a
) to edit a
• When the left soft key function is Edit, press the Edit (left) soft key (
Contact.
• When the left soft key function is Options, press the Options (left) soft key (
)
and a pop-up menu appears.
Right Soft Key
Some functions of the right soft key are as follows.
• In standby mode, press the Contacts (right) soft key (
) to open the Contacts
list (Find screen).
• When the right soft key function is Back, press the Back (right) soft key (
back up one menu level.
to
• When the right soft key function is Options, press the Options (right) soft key
(
) and a pop-up menu appears.
• In a message, press the Add (right) soft key (
) to add a Contact to the Send To
list.
OK Key
• In standby mode, press the MENU key ( ) to open the main menu.
• In a menu, press the OK key ( ) to accept the highlighted selection.
Understanding Your Phone 14
• In camera mode, press the Take key ( ) to take a photo or to create a Pic
message.
• When the OK key function is EDIT, press the EDIT (OK) key ( ) to edit a Draft
message.
Clear Key
The CLR key (
) is used to erase or clear numbers, text, or symbols from the
display. You can also use the
key to return to a previous menu or to return
to standby mode from any menu.
1. If you enter an incorrect character, briefly press
to backspace
(and delete) the character.
2. To erase the entire sentence, press and hold
.
3. To back up one menu level, briefly press
.
4. To return to standby mode, press and hold
until you return to
standby mode.
End Key
1. In standby mode, press and hold the END key (
2. Briefly press once to disconnect a call.
to return to standby mode from any menu, or to cancel the last
) to turn your phone off.
3. Press
input.
4. When your phone is turned off, press
to turn your phone on.
Send Key
The Send key (
) is used to answer calls, dial calls, and to recall the last
number(s) dialed, received, or missed.
1. Press once to answer calls.
2. Enter a number and briefly press
to make a call.
in standby mode to display a list of recent calls to and
3. Briefly press
from your phone.
4. Press
twice in standby mode to call the most recent number.
5. Press
to pick up a waiting call. Press
again to switch back to
the other call.
Navigation Key
Use the directional keys on the navigation key (
) to browse menus, sub-
menus, and lists. Each key also acts as a shortcut to launch applications.
15
Understanding the Display Screen
Camera Key
In standby mode, momentarily press the Camera key to activate the camera built
into your phone.
In standby mode, press and hold the Camera key to activate the camcorder built into
your phone.
In camera or camcorder mode, momentarily press the Camera key to switch
between camera and camcorder modes
Understanding the Display Screen
1. The top line of your phone’s main display
contains icons that indicate network status,
battery power, signal strength, connection
type, and more.
1
2
3
2. The center portion of the main display
shows information such as call progress
information, messages, and photos.
3. The bottom line of the main display shows
current soft key functions. The sample
screen shows that:
•
•
•
Pressing the Left soft key (
) will show the Messages menu.
Pressing the
key will show the Main Menu.
Pressing the Right soft key (
) will show the Contacts list, Find screen.
Display Screen Icons
Your SCH-r610 phone can show you definitions of the icons that appear on the top
lines of the front and main displays. To access the Icon Glossary:
ᮣ
In standby mode, press the MENU key ( ), then press
tings), (for Phone Info), and for Icon Glossary. A list shows
of the icons that can appear on the top line of the display.
(for Set-
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn of situations such as
low memory. Dialogue boxes and their definitions are outlined below.
• Choice
•
Example: “Save message?”
• Reconfirm
•
Example: “Erase all messages?”
• Performing
Understanding Your Phone 16
•
Example: “SENDING...” “Connecting...”
• Completed
•
Example: “Message saved in drafts”
• Information
•
Example: “New Message”
• Error
•
Example: “System Error!”
• Warning
•
Example: “Battery Low,” “Memory Full!”
Backlights
Backlights illuminate the internal and external displays and the keypad. When you
press any key or open the phone, the backlights come on. They go off when no keys
are pressed within a period of time set in the Backlight menu.
Note: During a phone call, the display backlights dim and turn off after ten seconds to conserve battery
power, regardless of the Backlight setting.
Your Phone’s Modes
Call Answer Mode
You can select how you wish to answer a call.
1. In standby mode, press the MENU key ( ), then press
Settings), (for Call Settings), and for Call Answer. The
following call answer options appear in the display:
(for
•
Any Key — Pressing any key except the
key answers a call.
key,
key, or
•
•
Send Key — Only pressing
Slide Up — Sliding the phone open or pressing
answers a call.
answers a call.
Tip: You can set your phone to answer calls automatically, without any input from you. (See “Auto Answer”
on page 144 for more information.)
2. Use the navigation keys to highlight an option.
3. Press the
key to select the method for answering calls.
Input mode
Input mode determines how you enter text, numbers and symbols. While at any text
entry screen, press the Left soft key ( ), then choose the input mode from the
17
Your Phone’s Modes
pop-up menu using the navigation keys. Optional input modes are T9 Word, Abc,
Tip: You can also cycle between T9 Word, Abc, and 123 by repeatedly pressing and holding the
key.
Lock Mode
When the phone is in Lock mode, restrictions are placed on phone use. You can
receive calls and messages, but cannot place outgoing calls (except for emergency
numbers) until you unlock the phone. Lock mode also restricts access to menus and
the volume key. Unlock your phone by entering the lock code when prompted. (See
Standby Mode
Standby mode is the state of the phone once it has found service and is idle. The
phone goes into standby mode:
• After you power the phone on.
• When you press
after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as all phone status
icons.
1. While in standby mode, enter a phone number, and press
to place a
call.
2. Press
to return to standby mode.
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds and a notification
message appears in the display when a new message arrives. The following options
also appear in the display:
• View Now
• View Later
Use the navigation keys to highlight the desired option and press the
key.
Talk Mode
You can place and receive calls only when your phone is on. While in a call your
phone is in talk mode. Press the Options (right) soft key ( ) to display a list of
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
Understanding Your Phone 18
• In standby mode, press and hold
. “Entering Silent Mode” briefly appears in
the display and your phone returns to standby mode.
• While in Silent mode and standby mode, press and hold
. “Exit Silent Mode”
briefly appears in the display and your phone returns to standby mode.
Vibrate Mode
ᮣ
In standby mode, repeatedly press and the Down volume key ( ) until
Vibrate appears in the display.
The volume key is on the upper left side of phone, near the Left soft key
(
).
Adjust the Voice Call Ringer
1. In standby mode, press the volume key (
) on the left side of the
phone up or down. Options are:
•
•
•
•
Ringer Off
Vibrate
Low
•
•
•
•
Medium
Medium/High
High
Low/Medium
Vibrate/High
2. When you are satisfied with the setting, press the SET ( ) key. Your
phone returns to standby mode.
Tip: You can also select the Voice Calls value by pressing the MENU key (
, and keys. Use the Volume key on the left side of your phone to adjust the ringer volume
setting.
), then pressing the
,
Note: The Vibrate icon ( ) appears in the display when the phone is in Vibrate mode. The Vibrate/High
icon ( ) appears in the display when the phone is in or Vibrate/High mode.
19
Your Phone’s Modes
Camera Mode
Camera mode lets you activate your phone’s camera to take pictures. In Camera
mode, you can also adjust the resolution and appearance of your pictures.
• Entering Camera Mode — In standby mode, press and hold the Camera shortcut
(left navigation) key.
• Exiting Camera Mode — Press the
key.
Understanding Your Phone 20
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
•
•
•
This section explains how to make and answer calls. This section also includes the
features and functionality associated with making or answering calls.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using the keypad.
2. Press the
key to place the call.
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press the
key to place the call.
You can specify other numbers as emergency numbers using the Emergency #
settings. (See “Emergency #” on page 149 for more information.)
Important!: Emergency number 911 is preset into your phone. You can dial this number almost any time,
even when the phone is locked or restricted.
If you call 911 an audible tone is heard and an Emergency prompt appears in the display for
the duration of the call.
21
Making a Call — Number Entry Dialing
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Dialing International Numbers
Call Another Country — Manual Method
1. In standby mode, enter 011 (the three-digit exit code for the United States).
2. Enter the country code for the country that you are calling.
3. Enter the number that you wish to call, then press the
key.
Note: Puerto Rico and Canada are on the North American dialing plan. Making calls to Puerto Rico and
Canada is similar to making calls within the United States, no unique country codes are necessary.
Call Another Country — Shortcut Method
1. In standby mode, press and hold the
key
until a plus sign (+) appears in the display.
Note: When you press the
key, your phone automatically replaces
this + with 011, the three-digit exit code for the United States.
2. Enter the country code for the country that you
are calling, or press and hold the
key
until a second plus sign (+) appears in the
display.
Tip: If you place most or all of your international calls to numbers in the
same country, set-up the International Dialing shortcut to dial that
country’s code for you. (For more information, see “International
Dialing” on page 147)
Note: When you press the
key, your phone automatically replaces
the second + with the two-digit country code you have selected
for the International Dialing shortcut.
3. Enter the number that you wish to call, then
press the
key.
Call Functions 22
Manual Pause Calling
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — P pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
• Wait — W pause — A hard pause stops the calling sequence until you press the
key.
To manually call a number with pause(s) without storing it to your Contacts:
1. Enter the number you wish to call.
2. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
•
•
2-Sec Pause — a two-second pause.
Wait — a hard pause (awaits input from you).
3. Use the navigation keys to highlight the desired pause option.
4. Press to enter the highlighted pause into your number sequence.
Note: If you select 2-Sec Pause, P appears in the display. If you select Wait, W appears in the display.
5. Press
to call the number.
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s Contacts list.
Speed Dialing lets you quickly and easily dial any contact in your Contacts list by
using that contact’s location number in the list. You can assign and change location
(speed dial) numbers for your contacts. (See “Assigning Speed Dial Numbers” on
page 61 for more information.)
One-Touch Dialing
Speed Dial numbers 2 through 9 are special One-Touch dialing numbers. You can
call the phone numbers stored in your phone’s Contacts list and assigned Speed Dial
numbers 2 through 9 by pressing and holding a single key.
Example: For Speed Dial number 3, press and hold the
key until the name and number appear in the
display and the number is dialed.
23
Making a Call — Quick Search Dialing
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing locations.
Example: For location number 13, briefly press the
key, then press and hold the
key until the
name and number appear in the display and the number is dialed.
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch dialing locations.
Example: For location number 113, briefly press the
key, briefly press the
key again, then press
and hold the
dialed.
key until the name and number appear in the display and the number is
Pause Dialing From a Contacts Entry
• If you speed dial a contact that contains (two-second) P pause(s) simply wait for
the pauses to pass and the dialing to complete.
• If you speed dial a contact that contains (hard) W pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any number stored
in your Contacts list by pressing the number keys that
correspond to the first few letters of a Contact name.
(For information on enabling Quick Search, see “Quick
Search” on page 153.)
Quick Search Dialing a Contact
To find and dial a Contact, do the following:
1. In standby mode, press the number keys that
correspond to the first few letters of the
Contact name, as shown.
Call Functions 24
2. Press the Up navigation key. The Contact List
screen appears showing the desired Contact
name, as shown.
3. If needed, use the Up and Down navigation
keys to highlight the Contact you wish to call.
4. Press
to call the highlighted Contact.
Making a Call — Voice Dialing
Your r610 mobile phone includes state-of-the-art voice recognition software that lets
you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your Contacts list by
saying the name of the contact (Name Dialing). You can also use Voice Dial to dial
any valid telephone number, even numbers not stored in your Contacts list, by
speaking the individual digits in the number (Digit Dialing).
Voice Dialing Tips:
• Wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking to someone on the phone.
• When saying a name, say the first name then the last name.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold the
key.
“Say a Command” appears in the display and is pronounced through the
earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
3. Speak clearly and say the name of a person in your Contacts list, first
name followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
25
Making a Call — Voice Dialing
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with “Did you say?” followed by the first
name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 128, for more information.)
•
•
Press the Repeat (right) soft key ( ) to say the name again.
Press the Settings (left) soft key ( ), then press the Exit (right) soft key (
to exit Voice Dial without dialing.
)
If the recognized name has multiple numbers stored for it (that is, Home,
Work, Mobile, and so on), Voice Dial displays the possible choices and
prompts you with “Which number?”
5. Say one of the following number types:
•
•
•
“Home”
“Work”
“Mobile”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the
key.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person you want to
call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the number. If
Voice Dial is not sure it has recognized the number, it displays a choice list
of up to three numbers and prompts you with “Did you say?” followed by
the first number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next one, or use the
keypad to select the correct number from the list. (See “Choice Lists” on
page 128, for more information.)
•
•
Press the Repeat (right) soft key ( ) to say the name again.
Press the Settings (left) soft key ( ), then press the Exit (right) soft key (
to exit Voice Dial without dialing.
)
Call Functions 26
Pause Dialing From a Contacts Entry
• If you voice dial a contact that contains (two-second) T pause(s) simply wait for the
pauses to pass and the dialing to complete.
• If you voice dial a contact that contains (hard) P pause(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank account
number, and so on) and enter the appropriate response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
• A ring tone sounds and/or your phone vibrates (Your phone provides seven ring
volume settings including: Ringer Off, Vibrate, Low, Low/Medium, Medium,
Medium/High, High, or Vibrate/High, and/or different ring types to distinguish
callers.)
• A phone number (unless blocked by the caller) and a name appear in the display (If
the caller’s number and name are stored in your Contacts list).
• If the caller can’t be identified, Call from unavailable#, Call from restricted
number, or no number appears in the display.
• Your phone continues to notify you of the call until one of the following events
occurs:
– You answer the call.
– You ignore the call.
– The calling party ends the call.
– The call is sent to voicemail.
Answering an Incoming Call
ᮣ
Slide your phone open, if closed, or press the
key. The ring tone and/
or vibration stop and the caller’s voice can be heard in the earpiece.
Tip: You can set your phone to automatically answer calls or to answer calls when you press any key but
the key or automatically. (See “Call Settings” on page 144 for more information.)
The In-Use Options Menu
You can access numerous menus and features while in a call.
Note: If the call is disconnected while you are accessing the In-Use Option, the In-Use Option disappears
from the display and the phone eventually returns to standby mode.
1. While in a call, press the Options (right) soft key (
). The following
menu items appear in the display:
27
Ignoring a Call
•
on page 64 for more information.)
•
•
Contacts — The Contacts Find screen appears in the display.
Recent Calls — View, respond to, and manage your recent outgoing,
incoming, and missed calls.
•
•
•
•
Send DTMF — Send your phone number as DTMF tones.
Voice Privacy — Select Standard or Enhanced voice privacy.
Voice Memo — Record up to one minute of your phone conversation.
Speakerphone — Allows you to use the speakerphone option.
Do one of the following:
•
Use the Navigation key to highlight a menu or feature. Press the
the highlighted menu or to activate the highlighted feature.
key to open
•
Press the
key to exit the menu.
Tip: You can block sound going to the other parties) on this call by pressing the Mute / Unmute (left) soft
key ( ). This can reduce noise on conference calls.
Ignoring a Call
When you ignore an incoming call, the call is immediately forwarded to your voice
mail.
ᮣ
During an incoming call, press the Ignore (right) soft key (
). The caller
is forwarded to your voice mail.
Adjusting the Call Volume
In standby mode, repeatedly press the Volume key (
) down until the Call
Volume Level desired appears in the display. The Volume key is on the left side of
phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and Missed calls. You
can also view times for your last call and the time totals for all calls.
Review the Calls Log
1. In standby mode, press the MENU key ( ), then press
for Calls.
2. Press the number key associated with the Calls log that you wish to review
or the function you wish to access:
•
•
Press
Press
for Outgoing Calls.
for Incoming Calls.
Call Functions 28
•
•
•
•
Press
Press
Press
Press
for Missed Calls.
for All Calls.
for Call Timer.
for Data Counter.
Note: In cases where there is a Contacts match for a Calls log entry, the name associated with the number
appears in the display instead of the number.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls and stores them in
the Outgoing calls log. You can review the Outgoing calls log for the time and date of
a call, as well as other information.
Note: To quickly view your most recent calls, briefly press
in standby mode. Up to 270 of your most
recent outgoing, incoming, and missed calls appear in the display.
1. At the Calls menu, press
for Outgoing Calls. A list of your outgoing
calls appears in the display.
2. Use the navigation keys to highlight a call, then press the OPEN key (
to view the Name of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the duration of the call
(in minutes and seconds).
)
3. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
•
•
•
•
•
•
Save — Save the number to your Contacts.
Details — Calls to Contacts Only — Shows the entry for the called Contact.
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
View Timer — Shows the number of calls and/or the total time spent on the
Last Call, Outgoing Calls, Incoming Calls, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls.
4. Press the Msgs (left) soft key (
) launches the Send Message menu.
The following options appear in the display:
•
•
Text Message — Lets you send a text message to the selected number called.
Picture Message — Lets you send a picture message to the selected number
called.
29
Calls Log
•
Video Message — Lets you send a video message to the selected number
called.
Note: See “Creating and Sending New Messages” on page 69 for more information.
5. Use the navigation keys to highlight an option.
6. Press the
key to perform the highlighted option’s function.
Incoming Calls
Your phone retains information about the last 90 Incoming calls and stores them in
the Incoming call log. You can review the Incoming call log for the time and date of
the call, as well as other information.
1. At the Calls menu, press
for Incoming Calls. A list of your Incoming
calls appears in the display.
2. Use the navigation keys to highlight a call, then press the OPEN key (
to view the Name of the caller (if in the Contacts list), the originating
number, the time and date the call was received, and the duration of the
call (in minutes and seconds).
)
3. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
•
•
•
•
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the calling Contact.
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timer — Shows the number of calls and/or the total time spent on the
Last Call, All Calls, Received, Outgoing, Roaming Calls, Lifetime Calls.
4. Press the Msgs (left) soft key (
). The following options appear in the
display:
•
•
Text Message — Lets you send a text message to the selected calling number.
Picture Message — Lets you send a picture message to the selected calling
number.
•
Video Message — Lets you send a video message to the selected number
called.
Note: See “Creating and Sending New Messages” on page 69 for more information.
5. Use the navigation keys to highlight an option.
6. Press the
key to perform the highlighted option’s function.
Call Functions 30
Missed Calls
Your phone retains information about the last 90 missed calls (calls that were never
picked up) and stores them in the Missed call log. You can review the Missed call log
for the time and date of the call, as well as other information.
1. At the Calls menu, press
for Missed Calls. A list of your missed calls
appears in the display.
2. Use the navigation keys to highlight a call, then press the OPEN key (
to view the Name of the caller (if in the Contacts list), the originating
number, and the time and date the call was received.
)
3. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
•
•
•
•
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the calling Contact.
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
View Timer — Shows the number of calls and/or the total time spent on the
Last Call, All Calls, Received, Outgoing, Roaming Calls, Lifetime Calls.
4. Press the Msgs (left) soft key (
). The following options appear in the
display:
•
•
Text Message — Lets you send a text message to the selected called number.
Picture Message — Lets you send a picture message to the selected called
number.
•
Video Message — Lets you send a video message to the selected number
called.
Note: See “Creating and Sending New Messages” on page 69 for more information.
5. Use the navigation keys to highlight an option.
6. Press the
All Calls
key to perform the highlighted option’s function.
You can review all of the calls log entries (outgoing, incoming, and missed calls) for
the time and date of a call, as well as other information.
1. At the Calls menu, press
for All Calls. A list of all logged calls
appears in the display.
2. Use the navigation keys to highlight a call, then press the OPEN key (
)
to view further information about the call.
31
Calls Log
3. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the calling/called
Contact.
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
View Timer — Shows the number of calls and/or the total time spent on the
Last Call, All Calls, Received, Outgoing, Roaming Calls, Lifetime Calls.
4. Press the Msgs (left) soft key (
). The following options appear in the
display:
•
•
•
Text Message — Lets you send a text message to the selected calling/called
number.
Picture Message — Lets you send a picture message to the selected calling/
called number.
Video Message — Lets you send a video message to the selected number
calling/called.
Note: See “Creating and Sending New Messages” on page 69 for more information.
5. Use the navigation keys to highlight an option.
6. Press the
Data Call
key to perform the highlighted option’s function.
Your phone retains information about the last 10 data calls and stores them in the
Data call log. You can review the Data call log for the time and date of the call, as
well as other information.
1. In standby mode, press the MENU key ( ), then press
(for Calls)
and
for Data Call. A list of your missed calls appears in the display.
2. Use the navigation keys to highlight a call, then press
to view further
information about the call.
3. Press the Options (right) soft key (
). A pop-up menu containing the
following options appears in the display:
• Save — Save the number to your Contacts.
• Details — Calls from Contacts Only — Shows the entry for the calling/called
Contact.
• Erase — Erase the selected call from your Data call log.
• Lock / Unlock — Blocks / permits erasure of this Call entry.
Call Functions 32
• Erase All — Erase all calls from your Data call log.
• Data Counter — Shows the amount of data Transmitted and Received during
this call, the Total amount of data exchanged during this call, and the total
amount of data exchanged since the phone was activated.
4. Use the navigation keys to highlight an option.
Press the
Call Timer
key to perform the highlighted option’s function.
View the duration of your last call, total calls, and calls made during the life cycle of
you phone using the Call Timer feature.
Note: Call Timer is not for billing purposes.
1. At the Calls menu, press
for Call Timer. The following options
appear in the display:
•
•
Last Call — View the duration of your last call.
Outgoing Calls — View the duration of the total outgoing calls made on your
phone since the last erasure.
•
•
•
Incoming Calls — View the duration of the total incoming calls received on
your phone since the last erasure.
Roaming Calls — View the total calls duration on your phone while roaming
since the last erasure.
All Calls — View the duration of the total call, incoming, outgoing, and data
calls made on your phone since the last erasure.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Calls — View the duration of all calls since your phone was activated.
2. Press the Reset (left) soft key (
) to reset a selected counter except
Last Reset and Lifetime Calls.
3. Press the Reset All (right) soft key (
) to reset all counters except
Lifetime Calls.
4. Press the
key or the
key if you wish to exit the list.
Note: Although Total call timers can be erased, the Lifetime call timer can never be erased.
Data Counter
View the amount of Transmit data, Receive data, and Total data transmitted or
received since the last time you reset the data counters, and the Lifetime amount of
data transmitted or received.
33
Roaming
Note: Data Counter is not for billing purposes.
1. At the Calls menu, press
for Data Counter. The following options
appear in the display:
•
•
•
Transmit — View the total amount of data transmitted by your phone since the
last reset.
Received — View the total amount of data received by your phone since the
last reset.
Total — View the total amount of data sent or received by your phone since the
last reset.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or received by
your phone since activation (Lifetime Data Counter cannot be reset).
2. Press the Reset (left) soft key (
) to reset a selected counter except
Last Reset and Lifetime Data Counter.
3. Press the Reset All (right) soft key (
) to reset all counters except
Lifetime Data Counter.
4. Press the
key or the
key if you wish to exit the list.
Note: Although Total data counters can be erased, the Lifetime Data Counter can never be erased.
Roaming
What is Roaming?
Roaming lets you use your r610 phone when you travel outside of your Wireless
Provider’s coverage area. The Roaming icon ( ) appears in the top line of the
display when Roaming is active, and extra charges may apply when making or
receiving calls.
Note: Some features may be unavailable while roaming. Roaming also consumes additional power from
the battery requiring more frequent recharging. Contact your Wireless Provider for more information
about Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and out of your home
network. The following roaming options are available:
• Home only — Your phone is available for normal operation only in the designated
coverage area.
Call Functions 34
• Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of networks
is used to acquire service. If no preferred networks are found, any digital system is
acquired.
35
Menu Navigation
Section 4: Menu Navigation
Topics Covered
•
•
•
•
•
This section explains the menu navigation for your phone. It also includes an
outline of all the available menus associated with your phone.
Menu Navigation
Access the menus and sub menus in your phone using the navigation key (
)
and soft keys (
), or use a shortcut.
1. In standby mode press the MENU key ( ). The first of several menus
appears in the display.
Note: More than one menu may appear in your display. This setting can be modified in the Display/Menu
Style menu.
Tip: You can launch any of the Main Menus by using a voice command — In standby mode, press and hold
until the phone prompts, “Say a command.” Say “Go to” followed by a Main Menu name into
the microphone. For example, Say “Go to easyedge” to access the easyedgeSM menu.
2. Use the navigation key to browse through the menus.
3. Press
4. Press the right soft key (
Return to the Previous Menu
to enter the menu or sub menu that appears in the display.
) Back to return to the previous menu.
• Press the right soft key (
) Back to return to a previous menu.
• When Back does not appear in the display, press
previous menu.
to return to the
Menu Navigation 36
Menu Shortcuts
Use shortcuts to quickly access menus and sub menus. Press the MENU key ( ),
then press the number to the left of the menu to jump to the desired menu, sub
menu, or feature. For example, to jump to the Outbox sub menu, press the MENU
key ( ), then press
(for Messages) and
for Outbox.
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s corresponding
application.
Ringer Type
easyedgeSM
Multimedia
My Images
Navigate Using a Shortcut
You can also access menus and sub menus using menu numbers. Enter the menu
number after pressing the MENU key ( ) to go directly to the menu or sub menu of
your choice. Before you can navigate using a shortcut, you’ll need the menu or sub-
menu number that you wish to access.
1. In standby mode, press the MENU key ( ).
2. Press the number of the menu, sub menu, and so on for the feature that
you wish to access.
Example: Press the MENU key (
), then press
,
. This takes you to the Tools (MENU 8), and
then to the Calendar (sub menu 3).
Menu Shortcuts Outline
1
Contacts
1.1 Find
37
Menu Shortcuts Outline
1.2
1.3
1.4
Add New Entry
Speed Dial
Group
1.4.1 No Group
1.4.2 Business
1.4.3 Colleague
1.4.4 Family
1.4.5 Friends
1.5
Memory Info
2
Calls
2.1
2.2
2.3
2.4
Outgoing Calls
Incoming Calls
Missed Calls
All Calls
2.5
Data Call
2.6
Call Timer
2.7
Data Counter
3
Messages
3.1
Send Message
3.1.1 Text Message
3.1.2 Picture Message
3.1.3 Video Message
3.2
3.3
3.4
3.5
3.6
Inbox
Outbox
Drafts
Voicemail
Erase Messages
3.6.1 Inbox
3.6.2 Outbox
3.6.3 Drafts
3.6.4 All Messages
3.7
Msg Settings
Menu Navigation 38
3.7.1 General
3.7.1.1
Auto Save
Auto Erase
Quick Text
Voicemail #
Entry Mode
Callback #
Signature
Reminder
3.7.1.2
3.7.1.3
3.7.1.4
3.7.1.5
3.7.1.6
3.7.1.7
3.7.1.8
3.7.2 Text Message
3.7.2.1
3.7.2.2
3.7.2.3
Auto View
Signature
Auto Scroll
3.7.3 Picture/Video Message
3.7.3.1
3.7.3.2
Auto Receive
Signature
4
5
easyedgeSM
4.1
easyedgeSM
Display
5.1
Menu Style
5.2
Wallpaper
5.2.1 My Images
5.2.2 My Videos
5.2.3 Preset Images
5.3
5.4
5.5
Clock Format
Theme
Dialing Font
5.5.1 Style
5.5.2 Size
5.6
5.7
Banner
Backlight
5.7.1 Main Display
5.7.2 Keypad
5.7.3 Brightness
39
Menu Shortcuts Outline
6
Sounds
6.1
Volume
6.1.1 Voice Calls
6.1.2 Messages
6.1.3 Alarms
6.2
Ringer Type
6.2.1 Voice Calls
6.2.1.1
6.2.1.2
My Ringtones
My Sounds
6.2.2 Messages
6.2.2.1
Text Message
6.2.2.1.1 My Ringtones
6.2.2.1.2 My Sounds
Picture/Video Message
6.2.2.2.1 My Ringtones
6.2.2.2.2 My Sounds
Voicemail
6.2.2.2
6.2.2.3
6.2.2.3.1 My Ringtones
6.2.2.3.2 My Sounds
6.3
6.4
Alerts
6.3.1 Minute Beep
6.3.2 Roaming
6.3.3 Call Connect
6.3.4 Power On/Off
6.3.4.1
6.3.4.2
Power On
Power Off
Key Tone
6.4.1 Tone Level
6.4.2 Tone Length
7
Multimedia
7.1
7.2
7.3
7.4
7.5
7.6
Camera
Camcorder
My Images
My Videos
My Ringtones
My Sounds
Menu Navigation 40
7.6.1 Record New
7.7
Music Library
7.7.1 All
7.7.2 Artists
7.7.3 Albums
7.7.4 Genres
7.7.5 Playlists
8
Tools
8.1
Voice SVC
8.1.1 Voice Commands
8.1.2 Voice Settings
8.1.2.1
8.1.2.2
8.1.2.3
Choice Lists
Sensitivity
Digit Dialing
8.1.2.3.1 Adapt Digits
8.1.2.3.2 Reset Digits
Sound
8.1.2.4
8.1.2.4.1 Prompts
8.1.2.4.2 Digits
8.1.2.4.3 Names
8.1.2.4.4 Name Settings
Voice Launch
8.1.2.5
8.1.2.6
About
8.2
Bluetooth
8.2.1 Add New Device
8.2.2 Registered List
8.2.3 Bluetooth Settings
8.2.3.1
8.2.3.2
8.2.3.3
8.2.3.4
Enable/Disable
Discovery Mode
Device Name
Device Info
8.3
8.4
8.5
Calendar
Memo Pad
Alarm Clock
8.5.1 Alarm 1
8.5.2 Alarm 2
41
Menu Shortcuts Outline
8.5.3 Alarm 3
World Time
Calculator
Stop Watch
Coverter
8.6
8.7
8.8
8.9
8.9.1 Currency
8.9.2 Length
8.9.3 Weight
8.9.4 Volume
8.9.5 Area
8.9.6 Temperature
8.0
Tip Calculator
9
Settings
9.1
Location
9.2
Call Settings
9.2.1 Call Answer
9.2.2 Auto Answer
9.2.3 Auto Retry
9.2.4 TTY Mode
9.2.5 Voice Privacy
9.2.6 Data Settings
9.2.7 International_Dialing
9.3
Phone Settings
9.3.1 Airplane Mode
9.3.2 Shortcut Key
9.3.3 Language
9.3.4 Security
9.3.4.1
9.3.4.2
9.3.4.3
Lock Phone
Change Lock
Emergency #
9.3.4.3.1 911
9.3.4.3.2 *911
9.3.4.3.3 #911
Reset Phone
9.3.4.4
9.3.4.5
Erase All Entry
Menu Navigation 42
9.3.4.6
Restriction
9.3.4.6.1 Outgoing
9.3.4.6.2 Incoming
9.3.5 NAM Selection
9.3.6 System Select
9.3.7 Set Time
9.3.7.1
9.3.7.2
Set Date
Set Time
9.3.8 Quick Search
9.3.9 PC Connection
9.4
Memory Info
9.4.1 Save Options
9.4.1.1
9.4.1.2
Images
Videos
9.4.2 Phone Memory
9.4.2.1
9.4.2.2
9.4.2.3
9.4.2.4
9.4.2.5
Memory Usage
My Images
My Videos
My Ringtones
My Sounds
9.4.3 Card Memory
9.4.3.1
9.4.3.2
9.4.3.3
9.4.3.4
9.4.3.5
Memory Usage
My Images
My Videos
My Music
Format Card
9.5
Phone Info
9.5.1 Phone Number
9.5.2 Icon Glossary
9.5.3 Version
43
Changing the Text Entry Mode
Section 5: Entering Text
Topics Covered
•
•
•
•
•
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9
predictive text entry system to reduce the number of key strokes you must make
when entering text.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters, numbers, and symbols.
You can use the following text entry modes to simplify text entry:
• T9 Word — Press each key only once to enter the letter of the word that you’re
spelling. (T9 Word mode offers the same letter options as Abc mode. Press the
key to change letter options.)
• Abc — Enter letters, numbers, and symbols by repeatedly pressing each key until
the desired character (as shown on the key) appears in the display. Abc mode
letter options are:
– Abc — Enter initial capital letters
– ABC — Enter all upper case letters
– abc — Enter all lower case letters
Press the
key to change letter options.
• 123 — Enter numbers by pressing the corresponding key on the keypad.
• Symbols — Enter symbols into your message by pressing the number above the
symbol in the Symbol pop-up window.
Entering Text 44
The current text entry mode (Abc, 123, or T9 Word) is indicated in the lower part of
a text entry screen. To change the text entry mode, do either of the following:
ᮣ
Press and hold the
key. The left soft key label changes to indicate
changes in text entry mode. Press and hold the
the desired text entry mode appears in the display.
key repeatedly until
ᮣ
While composing a text message, press the Left soft key (
lowing options appear in the display:
). The fol-
•
•
•
•
•
T9 Word
Abc
ABC
123
Symbols
Use the navigation keys to highlight the desired text entry mode, then
press the key.
Using T9® Mode
T9 Word recognizes commonly used words for the numeric sequence of key presses
and inserts the word into your message. T9 Word is much faster than the traditional
method of text entry (Abc) and requires only one key press per letter of the word that
you’re spelling.
1. In standby mode, press the Message (left) soft key (
(for Send Message) and for Text Message.
), then press
2. Enter the phone number of the recipient, then press
. The Create Txt
Msg screen appears in the display.
3. Repeatedly press and hold the
key until the left soft key label
changes to T9 Word.
•
For practice, enter the word “Samsung” by pressing each of the following keys
only once:
S
A
M
S
U
N
G
T9 Word recognizes that the most commonly used word for the numeric
sequence you just entered is “Samsung”. If more than one word shares the
same numeric sequence, T9 Word provides the most commonly used word.
Other words, if any, appear in a pop-up list. To select one of these words, use the
Up and Down navigation keys to highlight a word, then press the
key.
45
Using Abc Mode
Using Abc Mode
1. In standby mode, press the Message (left) soft key (
(for Send Message) and for Text Message.
), then press
2. Enter the phone number of the recipient, then press
. The Create Txt
Msg screen appears in the display.
3. If needed, repeatedly press and hold the
key until the Left soft key
label changes to Abc.
•
Enter characters while in Abc mode by pressing the key labeled with the desired
characters (such as for “h”).
•
•
Press the key repeatedly until the desired character appears in the display.
Pause briefly and the displayed character is accepted and inserted into your
message.
•
Press
to enter a space.
Entering Symbols
Symbol mode enables you to enter symbols such as “@” or “%” into a text
message.
1. In standby mode, press the Message (left) soft key (
(for Send Message) and for Text Message.
), then press
2. Enter the phone number of the recipient, then press
. The Create Txt
Msg screen appears in the display.
3. Press the Left soft key (
). The following options appear in the display:
•
•
•
•
•
T9 Word
Abc
ABC
123
Symbols
4. The current text input mode is highlighted. Use the navigation keys to
highlight Symbols, then press
. The first of four symbol screens
appears in the display.
5. Use the Left and Right soft keys to page through the other symbols, if
desired.
6. Press the key that corresponds with the symbol that you wish to enter. For
example, press
for an exclamation point (!).
7. Repeat steps 3 through 6 to insert as many symbols into your message as
desired.
Entering Text 46
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. In standby mode, press the Message (left) soft key (
), then press
(for Send Message) and
for Text Message.
2. Enter the phone number of the recipient, then press
. The Create Txt
Msg screen appears in the display.
3. Repeatedly press and hold the
key until the left soft key label
changes to 123.
4. Press the key containing the corresponding number that you wish to insert
into your message.
47
Your Contacts List
Section 6: Understanding Your Contacts
Topics Covered
•
•
•
•
•
•
•
•
This section explains how to manage your daily contacts by storing their names
and numbers in your Contacts. Contacts entries are listed as sorted by name.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact having up to five
associated phone numbers, an e-mail address, and a picture ID.
Each phone number can be up to 32 digits in length, including hard pauses. Contact
names can be up to 32 characters in length. You can also assign one or more speed
dial numbers to each entry, and you can use your Contacts list to restrict incoming
Tip: One-Touch, Two-Touch, and Three-Touch Speed Dialing allow you to call numbers stored in your
Contacts list faster. (See page 27.)
Understanding Your Contacts 48
Open Your Contacts List
1. In standby mode, press the MENU key ( ), then press
for
Contacts. The following Contacts sub-menus and options appear in the
display:
•
Find — Find a phone number by entering a Contact name. (For more
Add New Entry — Add a number or e-mail to your Contacts.
Speed Dial — Assign speed dial numbers to your Contacts.
Group — Rename/add/manage Contacts groups.
•
•
•
•
Memory Info — View available memory for Contacts entries.
2. Use the Up and Down navigation keys to highlight the Contacts sub-menu
or option of your choice, and press the key.
Tip: You can also access a sub-menu or menu option by pressing the number key that corresponds to the
menu item number. For example, press for Add New Entry.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add information to an
existing entry.
Using the Contacts Add Option
1. At the Contacts menu, press
for Add New Entry. The Add New
Entry screen appears in the display with the Name field highlighted.
2. Use the keypad to enter a name or phrase to associate with the new
3. Use the Up and Down navigation keys to highlight each field.
4. Enter a phone number (Mobile, Home, or Work,) or an e-mail address (E-
mail) for the new Contacts entry.
5. If desired, assign the new Contact to a Group. This lets you send
messages to and find this Contact and other related contacts. (For more
7. If desired, enter an additional phone number (Pager or Fax) for the new
Contacts entry.
49
Adding a New Contacts Entry
8. If desired, select an identifying image by highlighting the photo ID field and
pressing the Set (left) soft key (
). The My Images screen appears in
the display. (For more information, see “My Images” on page 114)
9. Press the SAVE key ( ) to save the new Contacts entry.
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the caller to your Contacts
list.
Note: If the call was incoming and Caller ID information was unavailable, then the Save option is also
unavailable.
1. After you press the
key to end a call, the call time, length of call,
phone number, and name of the other party (if available) appear in the
display.
2. Press the Save (right) soft key (
). The Save screen appears in the
display showing the following options:
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
Tip: You can also store a phone number from standby mode by entering the number, and pressing the Save
(left) soft key ( ).
Creating a new Contacts entry:
3. Use the navigation keys to highlight Create New, then press the
key.
The following (number type) icons appear in the display:
Mobile
Pager
Home
Fax
Work
4. Use the Up and Down navigation keys to highlight the number type that
matches your new entry and press the key. The New Contact screen
appears in the display with the number being save populating the selected
number type field. (For more information on creating a new Contacts entry,
Understanding Your Contacts 50
Adding the number to an existing Contacts entry:
5. Use the Up and Down navigation keys to highlight Update Existing, then
press the
key. The Update Existing screen appears in the display
showing your current Contacts list.
6. Enter the first few characters of the Contacts entry name under which you
will store the saved number. (For more information on finding a Contacts
7. Use the Up and Down navigation keys to highlight the desired Contacts
entry, then press the
key. The following (number type) icons appear in
the Update Existing screen:
Mobile
Home
Fax
Work
Pager
8. Use the Up and Down navigation keys to highlight the appropriate
unassigned number type, then press the
appears in the display.
key. The Edit Contact screen
9. Make any added changes you wish to the Contacts entry. (For more
10. Press the SAVE key ( ) to save the entry.
Storing Number from a Calls Log
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, press the MENU key ( ), then press
for Calls.
2. Press the corresponding number on the keypad to view the following Calls
logs:
•
•
•
•
•
Press
Press
Press
Press
Press
for Outgoing Calls
for Incoming Calls
for Missed Calls
for All Calls
for Data Call
A list of your calls appears in the display.
3. Use the navigation keys to highlight the number you wish to store in
Contacts.
51
Finding a Contacts Entry
4. Press the Options (right) soft key (
).
5. Use the navigation keys to highlight Save, then press the
key. The
following options appear in the display:
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address you just
entered to an existing Contacts entry.
Finding a Contacts Entry
Voice Method
Use the VoiceSignal Contacts command to view contact information for any named
contact stored in your Contacts list by saying the name.
Note: The Contacts command shows the requested contact information in the display but does not dial any
phone numbers for the contact.
To look up information for a specific contact:
1. In standby mode, press the
key to launch VoiceSignal.
“Say a Command” appears in the display and is pronounced through the
speaker.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want to call, exactly
as it is entered in your contact list.
•
If VoiceSignal recognizes the name you said, the contact information for that
name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of up to three
names appears in the display, and VoiceSignal prompts you with “Did you
say?” followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next name, or use the
keypad to select the correct name from the list. (See “Choice Lists” on
page 128, for more information.)
•
•
To say the name again, press the Repeat (right) soft ( ) key.
To exit VoiceSignal without dialing, press the Settings (left) soft ( ) key, then
press the Exit (right) soft ( ).
5. The contact information for the name you selected appears in the display.
Understanding Your Contacts 52
Keypad Methods
Find by Name
If you have stored a named contact in your Contacts list, Find lets you locate the
entry quickly.
1. In standby mode, do one of the following:
•
If Quick Search is set to On, enter the numbers that correspond to the first few
letters of the Contacts entry’s name, then press the Up navigation key. The
Contact List screen appears in the display listing the Contacts entries whose
names match the numbers you entered. Now, skip to Step 3.
Example: If you saved a contact name as “Amy Smith”, begin your search for that contact by pressing
for “A”.
Note: For information about setting the Quick Search option, see “Quick Search” on page 153.
•
If Quick Search is set to Off, do one of the following:
– Press the Contacts (right) soft key ( ) — Contacts Find shortcut.
– Press the MENU key ( ), then press
(for Contacts) and
for Find.
The Find screen appears in the display with an alphabetical list of Contacts
showing.
2. Enter the first few characters of the name of the contact as it appears in
your Contacts list.
Example: If you saved a contact name as “Amy Smith”, begin your search for that contact by pressing
for “A”.
Note: As you enter letters, the entry names of the closest matches (thus far) appear in the display.
3. When the desired Contacts entry is listed in the display, highlight the
contact using the Navigation key (if necessary). Then, do one of the
following
•
•
•
•
Press the
Press the Edit (left) soft key ( ) to change the information about the contact.
Press the VIEW key to show information about the contact.
Press the Options (right) soft key ( ). The following options appear in the
display:
key to dial the number associated with the named contact.
– New Contact — Lets you add a new number to your Contacts list or to the
selected contact.
– Erase — Lets you delete the highlighted contact.
53
Finding a Contacts Entry
– Send Text Msg — Lets you send a text message to the selected contact.
– Send PIC Msg — Lets you send a picture message to the selected contact.
– Send Video Msg — Lets you send a video message to the selected contact.
– Call — Lets you place a call to the highlighted contact.
4. Use the Up and Down navigation keys to highlight an option, then press the
key to enter that option’s sub-menu.
Group
This option lets you find a Contacts list entry with a specific Group name.
1. At the Contacts menu, press
for Group. The Group List screen
appears in the display.
2. Use the Up and Down navigation keys to highlight the name of the group
you wish to browse, then press the
appears in the display.
key. The selected Group list
3. Use the Up and Down navigation keys to find the desired Contacts entry.
4. When the desired Contacts entry is listed in the display, highlight the
Contact using the Up and Down navigation keys (if necessary). Then, do
one of the following:
•
•
•
Press the Remove (left) soft key ( ) to delete the selected contact from the
Group. (Does not apply to No Group.)
Press the ADD key ( ) to add another existing contact entry to the selected
Group. (Does not apply to the General group.)
Press the Options (right) soft key ( ). The following options appear in the
display:
– Send Text Msg — Lets you send a text message to selected contact(s) in the
current group.
– Send PIC Msg — Lets you send a picture message to selected contact(s) in the
current group.
– Send Video Msg — Lets you send a video message to selected contact(s) in
the current group.
5. Use the Up and Down navigation keys to highlight an option, then press the
key to enter that option’s sub-menu.
Search by Number
This option lets you find a Contacts list entry by one of its phone numbers.
1. In standby mode, enter the first few numbers of the Contacts list entry you
wish to find (such as the area code or area code and exchange — for
example, 888-987).
Understanding Your Contacts 54
2. Press the Options (right) soft key (
). The following menu options
appear in the display:
•
•
•
•
•
•
Search — Lets you find Contacts list entries by their phone numbers.
2-Sec Pause — Adds a two-second pause.
Wait — Adds a hard pause (awaits input from you).
Send Text Msg — Lets you send a text message to the entered number.
Send PIC Msg — Lets you send a picture message to the entered number.
Send Video Msg — Lets you send a video message to the entered number.
3. Use the navigation keys to highlight the Search option, then press the
key. The Find screen appears in the display listing all phone numbers in
your Contacts list that contain the entered digits.
4. Use the navigation keys (if necessary) to highlight the desired Contacts
entry. Then do one of the following:
•
•
Press the
key to dial the highlighted number.
Press the OK key ( ) to display information about the Contacts entry
associated with the highlighted number. From the View Contact screen, you
can erase or edit the selected Contacts entry.
Editing an Existing Contact Entry
Once stored in the Contacts list, an entry can be changed quite easily.
2. Press the Edit (left) soft key (
). The Edit Contact screen appears in
the display with the contact name highlighted.
3. Use the navigation keys to highlight a number stored in this contact entry.
4. Press
to backspace and delete numbers.
to clear all numbers in the highlighted field.
5. Press and hold
Note: You can also add numbers (such as a second Mobile number or a Fax number) to the entry, assign it
to a Group, and add other information.
6. When you’re finished editing the entry, press the
key. Your changes
are saved and a confirmation message appears in the display.
55
Editing an Existing Contact Entry
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you are often required to
enter a password or account number. Instead of manually entering the numbers
each time, you can store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — A two-second pause that stops the calling sequence for two
seconds and then automatically sends the remaining digits.
• Wait — A hard pause that stops the calling sequence until further input from you.
Tip: You can enter multiple two-second pauses to extend the length of a pause. For example, two
consecutive two-second pauses cause a total pause time of four seconds.
Note: Keep in mind that pauses count as digits towards the 32-digit maximum.
Store Pauses in a New Contacts Entry
1. In standby mode, enter the number you wish to store (such as your bank’s
teleservice number).
2. Press the Options (right) soft key (
). The following menu options
appear in the display:
•
•
•
•
•
•
Search — Lets you find Contacts list entries by their phone numbers.
2-Sec Pause — Adds a two-second pause.
Wait — Adds a hard pause (awaits input from you).
Send Text Msg — Lets you send a text message to the entered number.
Send PIC Msg — Lets you send a picture message to the entered number.
Send Video Msg — Lets you send a video message to the entered number.
3. Use the Up and Down navigation keys to highlight the pause option of your
choice.
4. Press the
key to enter the highlighted pause into your number
sequence.
5. When you’re finished entering the number and pauses, press the Save
(left) soft key ( ) to store the number in your Contacts list.
Add Pauses to an Existing Contacts Entry
2. Press the Edit (left) soft key (
). The Edit Contact screen appears in
the display with the contact name highlighted.
Understanding Your Contacts 56
3. Use the Up and Down navigation keys to highlight a number stored in this
contact entry.
4. Use the Left and Right navigation keys to place the cursor where you want
to add a pause (usually at the right-hand end of the number).
5. Press the Options (right) soft key (
). The following menu options
appear in the display:
•
•
Set Speed Dial — lets you assign a Speed Dial number to this Contacts entry.
Set As Default — your phone automatically dials this number when you find
this Contacts entry and press the key.
•
•
2-Sec Pause — Adds a two-second pause.
Wait — Adds a hard pause (awaits input from you).
6. Use the navigation keys to highlight the pause option of your choice.
7. Press the
key to enter the highlighted pause into your number
sequence.
8. When you’re finished entering pauses, press the
key to save your
changes to the number in your Contacts list.
Assigning Speed Dial Numbers
Speed Dial lets you assign 1-digit, 2-digit, or 3-digit numbers to individual Contact
phone numbers, and then use the assigned Speed Dial numbers to more quickly
place calls. (For more information, see “One-Touch Dialing” on page 27.)
You can assign a Speed Dial number in the following ways:
• By using the Add New Entry screen (adding a new Contacts entry)
• By using the Edit Contact screen (editing an existing Contacts entry)
• By going directly to the Speed Dial menu
Using a New or Existing Contacts Entry
2. In the |